5Bar Insulation Double Pin Pressure Sensor transmitter 880-00084

The pressure range of this sensor is 0-5BAR,with the double insulate thread fitting is M4, and the corresponding resistance value is the conventional 10-184 Ω and M10X1.0 without Alarm.

When the pressure changes, the resistance value inside the sensor will change accordingly, and the different resistance values will be transmitted to the controller.

The shell and the equipment are connected and grounded, and there is no low-voltage alarm function. The appearance adopts the form of iron galvanized, has the function of rust prevention, can be stored and used for a long time.

Oil/gas pressure sensor is an important sensor which is mainly used to mThe pressure range of this sensor is 0-5BAR,with the double insulate thread fitting is M4, and the corresponding resistance value is the conventional 10-184 Ω and M10X1.0 without Alarm. When the pressure changes, the resistance value inside the sensor will change accordingly, and the different resistance values will be transmitted to the controller. The shell and the equipment are connected and grounded, and there is no low-voltage alarm function. The appearance adopts the form of iron galvanized, has the function of rust prevention, can be stored and used for a long time. easure and control engine oil pressure and gas brake in automobile and construction machinery.

At present, the general use of sliding line or metal sheet structure type oil pressure gauge. The sensor consists of a corrugated diaphragm and a thick film resistor.

When the pipeline oil pressure or pressure changes, the corrugated diaphragm displacement, driving the contact on the potentiometer sliding, change its resistance value, so as to achieve the dial pressure indication.