Engine Pressure Sensor
-
10Bar Cummins Diesel Engine Pressure Sensor transmitter 3846N-010-B（-C2）
These pressure sensor is commonly used in Cummins diesel engine, this product has been matched with the main engine, the pressure range is 0-10BAR (0-1.0Mpa), the detection pressure point is 0bar, 2bar, 4bar, 6bar, 8bar, 10bar, the corresponding resistance value is the conventional 10-184Ω ohm, installation Hex Nut size: S18, installation thread is NPT1/8,
-
10-184Ω KE21005 Single Pin Diesel Engine Oil Pressure Gauge Sensor
This KE21005 prerssure sensor corresponding resistance value is 10-184Ω
the pressure range of the sensor is 0-5Bar,The thread fitting of Intallation: NPT1/8 ; with Single pin output :M4.
It has good anti-vibration performance, long service life, easy installation, stable quality, reliable performance, wide operating temperature range.
-
10-184Ω 150053 Diesel Engine Oil Pressure Gauge Sensor With Alarm 0.8Bar
This 150053 prerssure sensor corresponding resistance value is 10-184Ω with Alarm point is 0.8Bar; the pressure range of the sensor is 0-10Bar,The thread fitting of Intallation: NPT1/8;
This pressure sensor is strictly approved by the automobile industry: QC/T822-2009 and ISO/TS16949 all standard requirements
-
10Bar 10-184Ω Diesel Engine Oil Pressure Gauge Sensor With Alarm 0.65Bar For Heavy Truck
This GY-11 prerssure sensor corresponding resistance value is 10-184Ω with Alarm point is 0.65Bar;
the pressure range of the sensor is 0-10Bar,The thread fitting of Intallation: M18X1.5mm with Chiave wrech S24;
It’s generally used in Automobile industry,motor vehiciles, automotive, electrical, instrumentation, construction machinery, agricultural machinery and a variety of professional machinery Special vehicles and applications – Diesel engine and Generator sets-Heavy industry and SAR vessels ….etc
-
360-081-032-002C 5Bar Insulation Pressure Sensor transmitter for DAF
The 360081032002C / 880-00084 pressure range of this sensor is 0-5BAR,the Shell insulation。The output port is 2-M4, and the corresponding resistance value is the conventional 10-184 Ω ,without Alarm. It,s can also replace DAF 236776.
When the pressure changes, the resistance value inside the sensor will change accordingly, and the different resistance values will be transmitted to the controller.
The shell does uncommunicate with the equipment, and there is no low-voltage alarm function. The appearance adopts the form of iron galvanized, has the function of rust prevention, can be stored and used for a long time.
-
3846N-010-B/C2 10Bar Construction Vehicle Cummins Diesel generator Engine Pressure Sensor
The 3846N-010-B/C2 pressure sensor is commonly used in Cummins Diesel generator Engine Pressure Sensor , this sensor has been matched with the main engine, the pressure range is 0-10BAR (0-1.0Mpa), the detection pressure point is 0bar, 2bar, 4bar, 6bar, 8bar, 10bar,
the corresponding resistance value is the conventional 10-184Ω ohm, installation Hex Nut size: S18, installation thread is NPT1/8,
Feature : Superior long term stability, Temperature compensated over wide range ,Low power consumption, Excellent repeat-ability / Hysteresis
Special design for customer -
SRP-TR-0-10 NPT1/8 10Bar Mechanical Oil Pressure Sensor Transducer Pressure Switch for Aerial working machinery
This SRP-TR-0-10 pressure sensor is main applied to all kinds of Aerial working machinery engines, for accurately monitor the pressure of the generator, also to ensure the safety of working at altitude. has been obtained the QC/T822-2009, ISO/TS16949, RoHs and Reach Certificates.
-
3846N-010-B（-C2）0-10Bar,10-184Ω Cummins Engine Oil Pressure Sensor Transducer
These 3846N-010-B（-C2） pressure sensor is commonly used in Cummins diesel engine, this product has been matched with the main engine, the pressure range is 0-10BAR (0-1.0Mpa), the detection pressure point is 0bar, 2bar, 4bar, 6bar, 84bar, 10bar,the corresponding resistance value is the conventional 10-184Ω ohm, installation Hex Nut size: S18, installation thread is NPT1/8,
-
JUP00338 Diesel Engine Pressure Gauge Sensor With 1.4Bar Alarm
This JUP00338 prerssure sensor corresponding resistance value is 10-184Ω with Alarm point is 1.4Bar;
the pressure range of the sensor is 0-10Bar,The thread fitting of Intallation: NPT1/8 ; with double output : M4-M6;
It’s generally used in Automobile industry,motor vehiciles, automotive, electrical, instrumentation, construction machinery, agricultural machinery and a variety of professional machinery, the power pipeline of vessel Ship hull , water treatment engineering etc…..
-
10-184Ω JUP00032 Doosan Engine Pressure Gauge Sensor With 0.8Bar Alarm
This JUP00032 prerssure sensor corresponding resistance value is 10-184Ω with Alarm point is 0.8Bar;
the pressure range of the sensor is 0-10Bar,The thread fitting of Intallation: NPTF1/8 ; with double output : M4;
It’s generally used in Automobile industry,motor vehiciles, automotive, electrical, instrumentation, construction machinery, agricultural machinery and a variety of professional machinery, the power pipeline of vessel Ship hull , water treatment engineering etc…..
-
M18X1.5 Mechanical 5Bar Diesel Engine Pressure Sender Unit For Agriculture
It is widely used in various harvester, the engine pipe of vehicles and ships, water processing projects,inspection and control of indust rial processes, hydraulic and pneumatic control project s, etc. This Sensor with inserts ：output resistance value G（6.3-135°)with output alarm pressure WK（4.8-135°)，the protective alarm point is 0.5BAR ; the pressure range of sensor is 0-5Bar，
-
0-100Psi 264-28Ω Double Pin Engine Oil Pressure Swtich Transmitter Without Alarm
This 880-00024 pressure sensor transmitter is exported overseas and customized to the specific requirements of overseas customers:The pressure range 0-100 psi; corresponding resistance from high to the bottom; resistance value is thel unconventional 264-28Ω,
This sensor has strictly passed the Automotive Industry: QC/T822-2009 and ISO/TS16949 all standard requirements, Testing items include: Error accuracy, Overload pressure, High and low temperature test, Waterproof, Anticorrosive, Shockproof, Collision resistance, Durability test and so on, can work in harsh environment and Bad weather for a long time.
It can keep monitoring the working state of engine in real time accurately. -
360-081-030-009C/360-081-030-009K/880-00073 10Bar Pressure Sensor transmitter for BMW VAG DEUTZ-FAHR
This pressure sensor is 10Bar Pressure Sensor transmitter 360-081-030-009C/360-081-030-009K/880-00073 Also can replaceable for DEUTZ-FAHR 9946645; BMW 2 230 281 ;VAG T11 919 081; with the corresponding resistance value is the conventional 10-184Ω, the thread fitting is general size M10X1.0, when the pressure changes, the internal resistance value of the sensor will change, the different resistance values will be transmitted to the controller, the shell and the equipment conduction ground, have low voltage alarm function.
The appearance adopts the form of iron galvanized, has the function of rust prevention, can be stored and used for a long time. Widely used, can be common with VDO products, domestic and foreign manufacturers are using this pressure sensor.
-
NTPF1/8 10Bar Engine Pressure Sensor transmitter 360-081-032-001/ 360-081-030-15C
The NTPF1/8 10Bar Engine Pressure Sensor transmitter 880-00072/ VDO 360-081-032-01/ 360-081-030-15C is a 10-184Ω vdo universal oil pressure sensor, and The thread fitting is NPTF1/8, which can be designed and customized according to the customer’s use. It has a connecting insertion plate, alarm pressure is 0.8BAR, and the measuring range is 0-10BAR. The appearance is galvanized iron, which has the function of rust prevention, and can be stored and used for a long time. Widely used, can be common with VDO products, domestic and foreign manufacturers are using this pressure sensor.
-
360-081-032-002C 5Bar Insulation Double Pin Pressure Sensor transmitter 880-00084
The 360-081-032-002C 880-00084 pressure range of this sensor is 0-5BAR it,s also can deirect replaced DAF 236776 ,with the insulate double thread fitting is M4, and the corresponding resistance value is the conventional 10-184 Ω and M10X1.0 without Alarm. When the pressure changes, the resistance value inside the sensor will change accordingly, and the different resistance values will be transmitted to the controller. The shell and the equipment are connected and grounded, and there is no low-voltage alarm function. The appearance adopts the form of iron galvanized, has the function of rust prevention, can be stored and used for a long time.
-
JE21167A M18 X 1.5,10Bar Diesel Engine Pressure Sensor transmitter
This sensor has strictly passed the Automotive Industry: QC/T822-2009 and ISO/TS16949 all standard requirements, Testing items include: Error accuracy, Overload pressure, High and low temperature test, Waterproof, Anticorrosive, Shockproof, Collision resistance, Durability test and so on, can work in harsh environment and Bad weather for a long time.
It can keep monitoring the working state of engine in real time accurately.
Our factory specializes in providing accurate and stable pressure sensors, accurate, stable performance, support customization, widely used in various types of auto engine pressure sensors,
-
KUS JE2166A Signle Pin 10Bar Oil Engine Pressure Sensor Transmitter
This KUS JE2166A pressure sensor is 10Bar Signle Pin Pressure Sensor transmitter with the Black injection molding, colorful appearance, oval shape, the corresponding resistance value is the conventional 10-184Ω, the output of single terminal, the binding post is the general size M10X1.0, when the pressure changes, the internal resistance value of the sensor will change, the different resistance values will be transmitted to the controller, the shell and the equipment conduction ground, no low voltage alarm function. The appearance adopts the form of iron galvanized, has the function of rust prevention, can be stored and used for a long time. It can also be customized according to your requirements
-
10Bar 10-184Ω Signle Pin Oil Engine Pressure Sensor Transmitter Without Alarm 880-00013/ (mps-0-10)
This is 880-00013/ (mps-0-10) is the single-pin out-put with the pressure range is 0-10Bar engine pressure sensor, and the corresponding resistance value is the conventional 10-184Ω.without the Alarm .
-
JE21103 NPT1/8 10Bar Mechanical Oil Pressure Sensor Transducer Pressure Switch for Boat
This JE21103 NPT1/8 10Bar oil pressure sensor is especially suitable for yachts, ships, boat and other European generators, as well as the Asia-Pacific unit pressure sensor is 10Bar Pressure Sensor transmitter with the corresponding resistance value is the conventional 10-184Ω, the thread fitting is general size NPT1/8 when the pressure changes, the internal resistance value of the sensor will change, the different resistance values will be transmitted to the controller.
-
3846N-010 EQ153 Cummins Engine Oil Pressure Sensor Pressure Transducer
The pressure sensor,oil pressure switch Model Number:3846N-010, 3846N-010-C1, 396725 : is mainly to use in the Cummins diesel engine. This product has been matched with the main engine, mainly applicable to EQ153 twin bridge model (Cummins,Dongfeng).
-
KE21004 NPT1/8 10/840Ω Single Connection 1 Pin Generator Pressure Sensor Transmitter for Agricultural Farming
KE21004 Generator Pressure Senson,The pressure range is 10-840Ω High Resisitance,the Single Connection without Alarm, it,s a protective threshold value of 1BAR and measuring range of 0-10BAR, the fitting thread is NPT1/8 .Mainly used in various agricultural machinery and harvesters etc….
