Generator Set Pressure Sensor
-
SRPTR010 Diesel Engine Oil Pressure Sensor With 0.8 Alarm
SRP-TR-0-10 Engine Oil Pressure Sensor corresponding the Resistance Value 10-184Ω with Alarm point is 0.8bar;
The both connecting fast-on internal pin 2-M4
the pressure range of the sensor is 0-10Bar,
The thread fitting of Intallation: NPT1/8;
This pressure sensor is strictly approved by the automobile industry: QC/T822-2009 all standard requirements
-
VDO 360-081-032-014 Diesel Engine Oil Pressure Gauge Sensor
VDO360-081-032-014 0-10Bar;
prerssure sensor corresponding resistance value is 10-184Ω ;
the pressure range of the sensor is 0-10Bar,
The thread fitting of Intallation: NPT1/8;The output is 2-M4.
This pressure sensor is strictly approved by the automobile industry: QC/T822-2009 all standard requirements
-
KE21011B Reverse Resistance Value 240-33Ω Diesel Engine Oil Pressure Sensor
KE21011B Diesel Engine Oil Pressure Gauge Sensor corresponding Reverse Resistance Value 240-33Ω
the pressure range of the sensor is 0-100 PSI
The thread fitting of Intallation: NPT1/8;
This pressure sensor is strictly approved by the automobile industry: QC/T822-2009 all standard requirements
-
360-081-030-052 Diesel Engine Oil Pressure Sensor NPT1/8
360-081-030-052 Diesel Engine Oil Pressure Gauge Sensor :0-10bar,10-184Ω，with Alarm 0.5Bar
The thread fitting of Intallation: NPT1/8;
This pressure sensor is strictly approved by the automobile industry: QC/T822-2009 all standard requirements
-
3846N-010-C2 Cummis Diesel Engine Oil Pressure Sensor
3846N-010-C2 Diesel Engine Oil Pressure Gauge Sensor :0-10bar,10-184Ω，with Alarm point 0.08MPa
The thread fitting of Intallation: NPT1/8;
This pressure sensor is strictly approved by the automobile industry: QC/T822-2009 all standard requirements..
-
YG2221G Diesel Engine Oil Pressure Sensor For EQ153 Truck
YG2221G Diesel Engine Oil Pressure Gauge Sensor :0-10bar,
Output signal resistance value:10-184Ω，
with Alarm point 0.08MPa /0.8 bar;
The thread fitting of Installation: Z 1/8 ;
the out-puts Hex nets with two different size screws, one is bigger the other one.
Mainly applied to Truck Dongfeng EQ153 ,
This pressure sensor is strictly approved by the automobile industry: QC/T822-2009 all standard requirements..
-
3846N-010-C1 3967251 C3967251 Cummis Dongfeng Diesel Engine Oil Pressure Sensor
3846N-010-C1 3967251 C3967251 Cummis Dongfeng Diesel Engine Oil Pressure Sensor
Pressure rang:0-10bar, Out-put 10-184Ω，with Alarm point 0.08MPa
The thread fitting of Intallation: NPT1/8 lengthen.
This pressure sensor is strictly approved by the automobile industry: QC/T822-2009 all standard requirements..
-
880-00048/ PD121222 96℃ NPT3/8 Engine Coolant Water Temperature Gauge With Alarm for Boat Ship
The 880-00048 / PD121222 is the popular type of switch widely used on ships，boats, yacht etc， Install on radiator or cooling system piping. Bimetallic disk is a kind of sensor element that changes its state depending on the temperature of coolant.
When it reaches a reserved set temperature, the disc snaps, shutting off the circuit that activates the radiator cooling fan.
-
10Bar Cummins Diesel Engine Pressure Sensor transmitter 3846N-010-B（-C2）
These pressure sensor is commonly used in Cummins diesel engine, this product has been matched with the main engine,
the pressure range is 0-10BAR (0-1.0Mpa),
the detection pressure point is 0bar, 2bar, 4bar, 6bar, 8bar, 10bar,
the corresponding resistance value is the conventional 10-184Ω ohm,
The both connecting fast-on internal pins 2-M4;
Installation thread is NPT1/8 and Hex Nut:S18.
-
10-184Ω KE21005 Single Pin Diesel Engine Oil Pressure Gauge Sensor
This KE21005 prerssure sensor corresponding resistance value is 10-184Ω
the pressure range of the sensor is 0-5Bar,The thread fitting of Intallation: NPT1/8 ; with Single pin output :M4.
It has good anti-vibration performance, long service life, easy installation, stable quality, reliable performance, wide operating temperature range.
-
JEP00402A Reverse Resistance Value 240-33Ω Diesel Engine Oil Pressure Sensor
JEP00402A Diesel Engine Oil Pressure Gauge Sensor corresponding Reverse Resistance Value 240-33Ω without Alarm;
the pressure range of the sensor is 0-10Bar,
The thread fitting of Intallation: NPT1/4;
This pressure sensor is strictly approved by the automobile industry: QC/T822-2009 all standard requirements
-
P-N 3846N-010 M16*1.5 Diesel Engine Oil Pressure Sensor with Alarm
P-N 3846N-010 Diesel Engine Oil Pressure Sensor with Alarm point 0.8bar.
Pressure sensor corresponding resistance value is 10-184Ω ;
the pressure range of the sensor is 0-10Bar,
The thread fitting of Intallation: M16*1.5 ;
The both connecting fast-on internal pins 2-M4.
This pressure sensor is strictly approved by the automobile industry: QC/T822-2009 all standard requirements.
-
SRP-TR-0-6.89Bar Diesel Engine Oil Pressure Sensor JUP00336
SRP-TR-0-6.89Bar Diesel Engine Oil Pressure Sensor JUP00336
Pressure rang 0-6.89bar, Out-put 10-184Ω,
The thread fitting of Installation: NPTF 1/8.
4.8X0.8mm-90° insert is installed on the G terminal
6.3X0.8mm-90° inserts are installed on the S terminal
This pressure sensor is strictly approved by the automobile industry: QC/T822-2009 all standard requirements.
-
5V DC Pressure Transmitter PressureTransducer Pressure Transmitter Customized
Pressure Transmitter with 5V DC
Customized according to the requirement of customer’s parameter.
Measurement range: 0-500PSIA; Power supply; 5V DC ; Output:0.5-4.5VThis pressure transmitter is strictly approved by the automobile industry: QC/T822-2009 all standard requirements.
-
10-184Ω 150053 Diesel Engine Oil Pressure Gauge Sensor With Alarm 0.8Bar
This 150053 prerssure sensor corresponding resistance value is 10-184Ω with Alarm point is 0.8Bar;
the pressure range of the sensor is 0-10Bar,The thread fitting of Intallation: NPT1/8;
The both connecting fast-on internal pin 2-M4
This pressure sensor is strictly approved by the automobile industry: QC/T822-2009 all standard requirements
-
JUP00338 Diesel Engine Pressure Gauge Sensor With 1.4Bar Alarm
This JUP00338 prerssure sensor corresponding resistance value is 10-184Ω with Alarm point is 1.4Bar;
the pressure range of the sensor is 0-10Bar,The thread fitting of Intallation: NPT1/8 ; with double output : M4-M6;
It’s generally used in Automobile industry,motor vehiciles, automotive, electrical, instrumentation, construction machinery, agricultural machinery and a variety of professional machinery, the power pipeline of vessel Ship hull , water treatment engineering etc…..
-
0-100Psi 264-28Ω Double Pin Engine Oil Pressure Swtich Transmitter Without Alarm
This 880-00024 pressure sensor transmitter is exported overseas and customized to the specific requirements of overseas customers:The pressure range 0-100 psi; corresponding resistance from high to the bottom; resistance value is thel unconventional 264-28Ω,
This sensor has strictly passed the Automotive Industry: QC/T822-2009 all standard requirements, Testing items include: Error accuracy, Overload pressure, High and low temperature test, Waterproof, Anticorrosive, Shockproof, Collision resistance, Durability test and so on, can work in harsh environment and Bad weather for a long time.
It can keep monitoring the working state of engine in real time accurately. -
3846N-010 EQ153 Cummins Engine Oil Pressure Sensor Pressure Transducer
The pressure sensor,oil pressure switch Model Number:3846N-010, 3846N-010-C1, 396725 : is mainly to use in the Cummins diesel engine. This product has been matched with the main engine, mainly applicable to EQ153 twin bridge model (Cummins,Dongfeng).
-
PORSCHE 92860620302 VDO360-081-034-004C Diesel Engine Oil Pressure Switch Sensor Sender Unit
This is PORSCHE 92860620302 VDO360-081-034-004C pressure sensor product is widely used in: PORSCHE, BWD, MERCEDES-BENZ,VDO, SIEMENS VDO,MEYLE etc,and so on all kinds of Diesel Engine also Cross Interchange Part No. for : 1S6675, 8090, PS284, PS271, 5333624, 14990, 70542000, 310029, 8090, 92860620301, 88924422, 0025421717 ,2011519 ,E1821A, OP6154 ,S4095, 92860620304 ,0142044, 0148200003, 09612 , 360081034004C, E1821A OPS154, 70631 A0025421717, 310024,70542000, 360-081-034-004C, 6750041044 ,OP25761, PS234, OP251, 5333728, S4095
-
360-081-030-009C/360-081-030-009K/880-00073 10Bar Pressure Sensor transmitter for BMW VAG DEUTZ-FAHR
This pressure sensor is 10Bar Pressure Sensor transmitter 360-081-030-009C/360-081-030-009K/880-00073 Also can replaceable for DEUTZ-FAHR 9946645; BMW 2 230 281 ;VAG T11 919 081; with the corresponding resistance value is the conventional 10-184Ω, the thread fitting is general size M10X1.0, when the pressure changes, the internal resistance value of the sensor will change, the different resistance values will be transmitted to the controller, the shell and the equipment conduction ground, have low voltage alarm function.
The appearance adopts the form of iron galvanized, has the function of rust prevention, can be stored and used for a long time. Widely used, can be common with VDO products, domestic and foreign manufacturers are using this pressure sensor.
-
NTPF1/8 10Bar Engine Pressure Sensor transmitter 360-081-032-001/ 360-081-030-15C
The NTPF1/8 10Bar Engine Pressure Sensor transmitter 880-00072/ VDO 360-081-032-01/ 360-081-030-15C is a 10-184Ω vdo universal oil pressure sensor, and The thread fitting is NPTF1/8, which can be designed and customized according to the customer’s use. It has a connecting insertion plate, alarm pressure is 0.8BAR, and the measuring range is 0-10BAR. The appearance is galvanized iron, which has the function of rust prevention, and can be stored and used for a long time. Widely used, can be common with VDO products, domestic and foreign manufacturers are using this pressure sensor.
-
360-081-032-002C 5Bar Insulation Pressure Sensor transmitter for DAF
The 360081032002C / 880-00084 pressure range of this sensor is 0-5BAR,the Shell insulation。The output port is 2-M4, and the corresponding resistance value is the conventional 10-184 Ω ,without Alarm. It,s can also replace DAF 236776.
When the pressure changes, the resistance value inside the sensor will change accordingly, and the different resistance values will be transmitted to the controller.
The shell does uncommunicate with the equipment, and there is no low-voltage alarm function. The appearance adopts the form of iron galvanized, has the function of rust prevention, can be stored and used for a long time.
-
3846N-010-B（-C2）0-10Bar,10-184Ω Cummins Engine Oil Pressure Sensor Transducer
These 3846N-010-B（-C2） pressure sensor is commonly used in Cummins diesel engine, this product has been matched with the main engine, the pressure range is 0-10BAR (0-1.0Mpa), the detection pressure point is 0bar, 2bar, 4bar, 6bar, 84bar, 10bar,the corresponding resistance value is the conventional 10-184Ω ohm, installation Hex Nut size: S18, installation thread is NPT1/8,
-
MS24539 Pressure Transmitter 0-120psi NSN 6620009935546 Pressure Sending Unit Senor
Oil pressure sending unit p/n MS24539-1. NSN 6620009935546, MS24539, MS245391
Measuring range 0-120 PSI.
Also replaces p/n 7416363, 800213, 40-2500915, JHP85-430. This sending unit is used on many 2.5 and 5 ton trucks and also the HMMWV. Sender works with the MS24540-2 and 12338471 gauges.
-
360-081-032-002C 5Bar Insulation Double Pin Pressure Sensor transmitter 880-00084
The 360-081-032-002C 880-00084 pressure range of this sensor is 0-5BAR it,s also can deirect replaced DAF 236776 ,with the insulate double thread fitting is M4, and the corresponding resistance value is the conventional 10-184 Ω and M10X1.0 without Alarm. When the pressure changes, the resistance value inside the sensor will change accordingly, and the different resistance values will be transmitted to the controller. The shell and the equipment are connected and grounded, and there is no low-voltage alarm function. The appearance adopts the form of iron galvanized, has the function of rust prevention, can be stored and used for a long time.
-
JE21167A M18 X 1.5,10Bar Diesel Engine Pressure Sensor transmitter
This sensor has strictly passed the Automotive Industry: QC/T822-2009 all standard requirements, Testing items include: Error accuracy, Overload pressure, High and low temperature test, Waterproof, Anticorrosive, Shockproof, Collision resistance, Durability test and so on, can work in harsh environment and Bad weather for a long time.
It can keep monitoring the working state of engine in real time accurately.
Our factory specializes in providing accurate and stable pressure sensors, accurate, stable performance, support customization, widely used in various types of auto engine pressure sensors,
-
JE21102A NPTF1/8 5Bar oil Pressure Sensor transmitter for Truck
This JE21102A 5Bar sensor transmitter has a pressure range of 0-5Bar, corresponding to a normal resistance value of 10-184Ω, an output terminal with two terminals (2-M4) , and a G terminal with an output resistance value of 10-184Ω, wK output alarm pressure 0.8 bar, when the pressure changes, the internal resistance of the sensor will change, detection pressure to 0.8 bar began to alarm. Mounting thread: NPTF1/8. (KUS JE21102A)
-
KUS JE2166A Signle Pin 10Bar Oil Engine Pressure Sensor Transmitter
This KUS JE2166A pressure sensor is 10Bar Signle Pin Pressure Sensor transmitter with the Black injection molding, colorful appearance, oval shape, the corresponding resistance value is the conventional 10-184Ω, the output of single terminal, the binding post is the general size M10X1.0, when the pressure changes, the internal resistance value of the sensor will change, the different resistance values will be transmitted to the controller, the shell and the equipment conduction ground, no low voltage alarm function. The appearance adopts the form of iron galvanized, has the function of rust prevention, can be stored and used for a long time. It can also be customized according to your requirements
-
10Bar 10-184Ω Signle Pin Oil Engine Pressure Sensor Transmitter Without Alarm 880-00013/ (mps-0-10)
This is 880-00013/ (mps-0-10) is the single-pin out-put with the pressure range is 0-10Bar engine pressure sensor, and the corresponding resistance value is the conventional 10-184Ω.without the Alarm .
-
KE21004 NPT1/8 10-184Ω Single Connection 1 Pin Generator Pressure Sensor Transmitter for Agricultural Farming
KE21004 Generator Pressure Senson,The pressure range is 10-184Ω ;the Single Connection without Alarm, it,s a protective threshold value of 1BAR and measuring range of 0-10BAR, the fitting thread is NPT1/8 .Mainly used in various agricultural machinery and harvesters etc….
-
JE21103 NPT1/8 10Bar Mechanical Oil Pressure Sensor Transducer Pressure Switch for Boat
This JE21103 NPT1/8 10Bar oil pressure sensor is especially suitable for yachts, ships, boat and other European generators, as well as the Asia-Pacific unit pressure sensor is 10Bar Pressure Sensor transmitter with the corresponding resistance value is the conventional 10-184Ω, the thread fitting is general size NPT1/8 when the pressure changes, the internal resistance value of the sensor will change, the different resistance values will be transmitted to the controller.
