M4 X 1.5 Automotive Engine Pressure Transducer Sensor
Model Number | CDYD1-04060102 |
Input Voltage | 5VDC |
Measuring Range | 0-0.5Mpa |
Output Voltage | 0.5-4.5V |
Thread fitting | M14 x 1.5 ( customized as requires.Parameters ) |
Operating Temperature | -40°C~125°C |
Over Pressure | 150%FS |
Case material | Stainless Steel (Carbon steel, Alloy) |
Accuracy | 1.0%FS; 2%FS |
Linear | 1%FS |
Reliability | 1%FS |
Service Life | >3million cycles |
Protection rank | IP66 |
Minimum Order Quantity | 50pcs |
Delivery Time | within 2-25working days |
Packaging Details | 25pcs /foam box , 100pcs / out carton |
Supply Ability | 200000pcd/Year |
Place of Origin | Wuhan,China |
Brand Name | WHCD |
Consider that the requirement of the sensor is very strict because of the bad working environment of automobiles.
So in our research and development and production,Our Electronics Pressure Transducer Sensor adopt the following as below:
1. Using silicon chip as pressure sensing element, high sensitivity, good linearity and strong anti-interference ability.
2. The silicone oil encapsulation protection structure is used to isolate the silicon chip from the medium, which avoids the corrosion or contamination of the silicon chip by the pressure medium, thereby greatly improving the service life of the product.
3. At the joint between the outer casing and the end cap, a riveted snap-fit structure is used, and a flexible sealant is applied to the outer casing. After long-term high and low temperature changes, the product will ensure that the joint will not be loosened and the sealing will be steady, which will improve the reliability of the product.
4. The Electronics Pressure Sensor adopts automatic flow operation, high and low temperature compensation, which ensures the reliability of the product is guaranteed.
It has been obtained the QC/T822-2009, ISO/TS16949, RoHs and Reach Certificate